The Editorial Team of the Rapid Prototyping Journal are pleased to share a list of the Top Downloaded and Top Cited Papers per year with 12-month immediacy. Congratulations to the authors!
2019
Top Downloaded:
Ali, M.H., Batai, S. and Sarbassov, D. (2019), "3D printing: a critical review of current development and future prospects", Rapid Prototyping Journal, Vol. 25 No. 6
Top Cited:
Majeed, A., Lv, J. and Peng, T. (2019), "A framework for big data driven process analysis and optimization for additive manufacturing", Rapid Prototyping Journal, Vol. 25 No. 2
2018
Top Downloaded:
Paul, S.C., van Zijl, G.P.A.G., Tan, M.J. and Gibson, I. (2018), "A review of 3D concrete printing systems and materials properties: current status and future research prospects", Rapid Prototyping Journal, Vol. 24 No. 4
Top Cited:
Paul, S.C., van Zijl, G.P.A.G., Tan, M.J. and Gibson, I. (2018), "A review of 3D concrete printing systems and materials properties: current status and future research prospects", Rapid Prototyping Journal, Vol. 24 No. 4
2017
Top Downloaded:
Yang, C., Tian, X., Liu, T., Cao, Y. and Li, D. (2017), "3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance", Rapid Prototyping Journal, Vol. 23 No. 1
Top Cited:
Sing, S.L., Yeong, W.Y., Wiria, F.E., Tay, B.Y., Zhao, Z., Zhao, L., Tian, Z. and Yang, S. (2017), "Direct selective laser sintering and melting of ceramics: a review", Rapid Prototyping Journal, Vol. 23 No. 3
2016
Top Downloaded:
Boparai, K.S., Singh, R. and Singh, H. (2016), "Development of rapid tooling using fused deposition modeling: a review", Rapid Prototyping Journal, Vol. 22 No. 2
Top Cited:
Torries, B., Sterling, A.J., Shamsaei, N., Thompson, S.M. and Daniewicz, S.R. (2016), "Utilization of a microstructure sensitive fatigue model for additively manufactured Ti-6Al-4V", Rapid Prototyping Journal, Vol. 22 No. 5
2015
Top Downloaded:
Turner, B.N. and Gold, S.A. (2015), "A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness", Rapid Prototyping Journal, Vol. 21 No. 3
Top Cited:
Lanzotti, A., Grasso, M., Staiano, G. and Martorelli, M. (2015), "The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer", Rapid Prototyping Journal, Vol. 21 No. 5
2014
Top Downloaded:
Günther, D., Heymel, B., Franz Günther, J. and Ederer, I. (2014), "Continuous 3D-printing for additive manufacturing", Rapid Prototyping Journal, Vol. 20 No. 4
Top Cited:
Kotlinski, J. (2014), "Mechanical properties of commercial rapid prototyping materials", Rapid Prototyping Journal, Vol. 20 No. 6